APPLICATIONS

Hall IC is used in unicycle/horizontal/twisted vehicles

The drive motor uses a Hall IC. The inside of the device consists of three Hall metal plates. When the magnet is facing the metal plate, the metal plate is laterally turned on due to the Hall effect. Therefore, the magnetic plate can be mounted on the wheel, and the Hall integrated chip can be mounted on the fixed plate. On the axis, the vehicle speed is measured by counting the pulses.

Hall IC recommended application：Y3413LUA/GH141FLUA

Hall IC application in electric two-wheeler

The Hall IC mainly acts as a detection rotor without mechanical contact on the electric two-wheel brushless motor. The Hall is mounted on the stator, the rotor is a magnetic field, and the Hall outputs a Hall pulse signal according to the sensed magnetic field. And trigger the electronic reversing switch in a certain order.

Hall IC recommended application：GH3141LUA/GH141FLUA/GH1613LUA

Hall IC application in electric tricycle

The Hall IC mainly plays a role of detecting the rotor without mechanical contact on the electric tricycle motor. The Hall is mounted on the stator, the rotor is a magnetic field, and the Hall outputs the Hall pulse signal according to the induced magnetic field, and according to the certain The order to trigger the electronic reversing switch.

Hall IC recommended application：Y3461LUA/GH1713LUA

Application of Hall IC in Speed Regulation of Electric Vehicles

The speed control switch of the electric vehicle is the speed control component of the electric vehicle, and the purpose of adjusting the speed is achieved according to the change of the output voltage of the linear Hall. Although the style of the turn is many, the working principle is the same. The rotation range of a general electric vehicle handle is between 0 and 30 degrees. The electric car's handle has three leads: the power supply, the ground wire, and the turn-off speed signal line, corresponding to the voltage input of the linear Hall, the ground wire, and the signal output pin.

Hall IC recommended application： GH1194E (with reverse connection)

Application of Hall IC in New Energy Three-Phase AC Asynchronous Motor

The displacement is converted into a periodic electrical signal, and then the electrical signal is converted into a counting pulse, the magnitude of the displacement is represented by the number of pulses, and the running direction of the motor is discriminated according to the output orthogonal signal.

AC asynchronous motor encoder recommended application：GHE2121/GHE2148/GHE2164 Recommended
application of AC asynchronous motor sensor circuit：GH1817LUA/GH1827LUB/GH1837LUB